3DJAKE SKULPT Copper – Powered By Thibra3D, 2,85 Mm / 500 G

What is 3DJake’s SKULPT filament?

3DJake SKULPT is a unique filament developed in collaboration with Thibra3D.
The filament allows the user to make adjustments or changes to the model after printing.

A revolutionary filament for industrial designers, prototype builders, artists, architects, propeller makers, or anyone who wants to create complete, clean, and ultra-smooth creations with their 3D printer.

With the SKULPT filament you do not need to worry about the layers, lines or blobs on the surface of your print.

The 3DJake SKULPT filament is made of a temperature-sensitive material that behaves like clay. However, the big advantage is that it can be reworked so finely that clean and smooth surfaces are created.

Heat up your model easily and make the desired adjustments! 3DJake SKULPT material is the ideal material for every phase of your project!

The characteristics of 3DJake SKULPT filament:

• Remove print layer lines, blobs or bumps with a little heat and water
• Lightweight, strong and self-supporting in all sizes
• Infinitely changeable: Adjusting, cutting and adding material is no problem with the SKULPT filament afterwards
• Low working temperature: 70 ° C is ideal for modelling
• Beautiful colours – gives shapes and shadows extreme clarity
• Easy to paint: degrease with soap and lukewarm water
• Reusable – never dries out and gets no cracks
• Use an alcohol lamp or hot air gun to heat certain areas of 3D printing
• Easy to process for the finest details
• Hard surface, polishable and easy to paint

The following print settings are recommended by us:

• 190 – 220 ° C nozzle temperature
• Nozzle diameter ≥ 0.4 mm
• Layer height ≥ 0.2mm
• Flow rate 110 – 120%
• Heating bed 45 – 60 ° C if available

Tips, Tricks & more can be found at http://www.thibra3d.com/!

Each filament spool is shipped in a sealed plastic bag.