ColorFabb PA-CF, 1.75 Mm
£57.39
Features & Advantages
- Special polyamide formula
- Nearly without warping
- Carbon fibre content
- Unique properties
- Fast reliable delivery options
- Safe and Secure Payments, Always
- Shop with Confidence, Pay Safely
- Your satisfaction is 100% guaranteed.
The PA-CF low-warp filament by colorFabb has a unique composition.
As a result, printing on an unheated building board is nearly warp-free.
Prints with little infill perfectly adheres to an unheated building board. Models with a higher infill should ideally be printed at board temperatures between 40 – 50 ° C.
PA-CF is reinforced with carbon fibres to increase stiffness.
Since carbon fibres are abrasive, we recommend using a wear-resistant nozzle.
PA-CF has high tensile and impact strength and allows for long-term use at 120 ° C.
The composition of the filament has been modified to reduce moisture absorption.
Carbon fibres are abrasive, which accelerates nozzle wear when using the filament.
More information about print settings and tips can be found here: https://colorfabb.com/how-to-print-with-pa-cf-low-warp
Due to the high stiffness of the 2.85 mm filament, colorFabb recommends the use of a coil holder with a certain friction, so that the unwinding of the filament is prevented.
| Diameter | 1.75 mm, 2.85 mm |
|---|---|
| Manufacturer No. | 8719033556218 |
| Recommended processing temperature | 260 – 280 °C |
| Item no. | CF-8719033556218 |
| Recommended heating temperature | 0 – 50 ° C |
| Net weight | 700 g |
| Manufacturers | colorFabb |
| Filament colour | Black |
| Product types | Carbon Filament, PA – Nylon Filaments |
| Content | 700 g |
Reviews
There are no reviews yet.