DimaFix Adhesive Spray, 400 Ml

Good adhesion of your printed parts on the print bed is a must in 3D printing! DimaFix is now available so that your object remains fixed during the printing process and avoid deformation. DimaFix is an aerosol spray adhesive for 3D printers with a heated print bed that prevents warping of large objects.

Dimafix provides a strong bond between the first layer and the build surface when the bed is heated above 60 ° C. Below 60 ° C DimaFix is ineffective, so prints can be easily removed from the building board. The adhesive spray is completely water-soluble, so cleaning the construction panel is a simple process.

Different print bed temperatures lead to different degrees of adhesion:
Below 60 ° C: No adhesion, the objects can be detached from the plate
60 – 75 ºC: Medium adhesion for simple geometries
75 – 95 ºC: High adhesion for complex geometries and long prints
Above 95 ºC: Very high adhesion, for very complex geometries and very long prints

How to use DimaFix

1. Clean the build plate of your 3D printer
2. Check if the print bed temperature is below 50 ° C
3. Spray DimaFix on your print bed (use a well-ventilated room)
4. Warm up your print bed and start printing
5. After printing, wait for the print bed to cool
6. Remove the printed item from the print bed

Properties

• Prevents warping
• Suitable for all types of materials (especially ABS filaments)
• Strong adhesion during printing
• Dissolves after printing virtually by itself
• Recommended for printing on heated beds
• Easy to clean – the product is water soluble
• Each spray can allows more than 100 applications